Home / Guides / Temporary fence gates: walk gates and vehicle gates

Guide

Temporary fence gates: walk gates and vehicle gates

Access date for every source below: November 17, 2026, America/Los_Angeles.
This guide stays on rented walk and vehicle gates that companies install with a temporary fence. It isn't a guide to buying gate hardware or building a DIY gate.

Why a rented perimeter often needs a gate

A temporary fence that encloses a construction site or an event still has to let people and, on many jobs, vehicles in and out. National Rent-A-Fence’s gates page (accessed November 17, 2026) describes swing and slide gates as a way for “your people and equipment” to “move safely and efficiently,” and lists uses that include commercial construction, housing developments, remodels, public works, and post-disaster reconstruction. The page says gates are “available in a variety of heights, widths, and configurations.” The page doesn't list every size, so ask the company what it stocks.

Ask the rental company for a walk (pedestrian) gate, a vehicle gate, or both, at the same time you request the fence. A quote checklist is in how to request temporary fence rental quotes.

Swing gates and slide gates, as one rental company describes them

On the National Rent-A-Fence gates page cited above:

  • Swing gates “require a large area to operate.” If the opening is “12 feet or less (such as a pedestrian entrance), a single swing gate is sufficient.” Swing gates “usually open inward (toward the property), unless impossible to do otherwise.” For wider openings (the page’s example is vehicle entrances), “double swing gates are recommended as this configuration requires less room to operate than a single, longer gate.”
  • Slide gates “require very little room to operate” and are “a preferred option when a construction area has limited space, such as near a roadway, property line or permanent structure.” “The area around a slide gate must be level to allow each gate to move freely and parallel to the attached chain link fence for proper operation.”

The same page lists these frame specifications: gate frame 1-3/8 inches, line post/braces 1-5/8 inches, and gate post 2-3/8 inches, galvanized, and “ASTM A392-06 Standards Compliant.” Those are National Rent-A-Fence’s published specifications, not a rule for every rental company. Other companies may offer different hardware; ask what they will install at your address.

An official city example: New York City construction-fence gates

Local codes can add rules that a catalog page does not cover. The New York City Department of Buildings construction fence project category page (accessed November 17, 2026) states: “Gates are installed only where required for access to the site. The street facing portion of the solid fence may have openings with gates of the same solid materials as the fence and installed as sliding or in-swinging gates.” The same page requires those construction fences to be at least 8 feet high. That is a New York City rule, not a national gate standard. See the temporary fence height guide and the temporary fence permits guide.

If the gate or fence will occupy a sidewalk or street, a right-of-way or street occupancy permit may also apply. Official examples from other cities are in the temporary construction fence requirements guide.

What to ask when you request a quote

  • How many walk gates and vehicle gates you need, and the opening width for each.
  • Whether a single swing, double swing, or slide gate is appropriate, including whether there is room to swing and whether the path for a slide gate is level, as National Rent-A-Fence describes.
  • Which way the gate must open (the National Rent-A-Fence page says swing gates usually open inward unless that is impossible).
  • Whether a city rule requires gates only at required access points, or a specific material or height — New York City’s official page is one example.
  • Whether the company will install, move, and remove the gates with the fence, and whether locked or attended access is part of the rental (ask; do not assume).

For event layouts that also use crowd-control barricades, see the event fencing and crowd control guide. For construction perimeters, see the construction fence rental guide.

Sources

  1. https://www.rentnational.com/temporary-fence/gates (accessed November 17, 2026)
  2. https://www.nyc.gov/site/buildings/dob/project-categories-cons-fence.page (accessed November 17, 2026)

Questions

Do I need a gate in a temporary fence?

If people or vehicles have to enter a fenced area, you will usually need at least one opening that can be closed. National Rent-A-Fence describes swing and slide gates for personnel and vehicles. New York City’s official construction-fence page says gates are installed only where required for access to the site.

What is the difference between a swing gate and a slide gate?

On National Rent-A-Fence’s gates page, a swing gate needs a large area to operate; a single swing gate is described as sufficient for openings of 12 feet or less, and double swing gates are recommended for wider vehicle entrances. A slide gate needs little room to operate but requires a level path so the gate can travel parallel to the fence.

What size temporary fence gate should I rent?

There's no standard size chart. National Rent-A-Fence says gates are available in a variety of heights, widths, and configurations, and it uses 12 feet as the example where a single swing gate is sufficient for a pedestrian opening. Ask the company for the opening you need and for the hardware it stocks at that location.

Do city rules affect temporary fence gates?

They can. New York City’s official construction-fence page requires sliding or in-swinging gates of the same solid materials on the street-facing portion of a solid fence, and only where access is required. Other cities may have different rules, or none published. Confirm with the agency that has jurisdiction.